Cisco C1300X-24P-4X Switch

The Cisco Catalyst C1300X-24P-4X is a managed Gigabit Ethernet switch designed for growing business networks, professional offices, and organizations that need reliable wired connectivity with Power over Ethernet (PoE) and high-speed uplinks. It combines 24 Gigabit Ethernet access ports, a 385W PoE power budget, and four 10G SFP28 uplink interfaces in a rack-mountable design.

As part of the Cisco Catalyst 1300X Series, this switch provides Layer 2 switching, Layer 3 capabilities, network segmentation, traffic management, and security features for modern business infrastructure. It can help organizations connect compatible wireless access points, IP phones, cameras, computers, and other network devices while simplifying cabling and centralized network administration.

If you are comparing business networking solutions, explore our networking products at NexoGet, learn what a Cisco switch does, or browse our range of Cisco Catalyst C1300X-24T-4X switches for a non-PoE alternative.

Cisco Catalyst C1300X-24P-4X Switch Overview

Watch Product Video Cisco C1300X-24P-4X Switch  
Download PDF Datasheet|Cisco C1300X-24P-4X Switch

The C1300X-24P-4X is intended for network environments where a combination of Gigabit access connectivity, PoE power delivery, and faster uplinks is important. Its 24 Ethernet ports provide connectivity for everyday business devices, while the four SFP28 interfaces support high-speed 10 Gigabit uplinks. Cisco also specifies 25G operation for stacking only on these SFP28 interfaces, so customers should check the supported configuration before selecting modules or cables.

The integrated PoE functionality allows compatible powered devices to receive both network connectivity and electrical power through Ethernet cabling. This can reduce the need for separate power adapters at each endpoint and simplify installation in offices, retail locations, education facilities, and other business environments.

With a 128 Gbps switching capacity and a forwarding rate of 95.23 million packets per second, the switch is designed to handle simultaneous traffic across its interfaces at wire speed under supported operating conditions.

Key Features at a Glance

• 24 × 10/100/1000BASE-T Gigabit Ethernet ports.
• Four SFP28 interfaces supporting 10G uplinks.
• 25G interface operation specified for stacking only.
• 385W total PoE power budget.
• PoE support for compatible network endpoints.
• 128 Gbps switching capacity.
• 95.23 Mpps forwarding rate for 64-byte packets.
• Layer 2 switching and Layer 3 capabilities.
• VLAN, traffic-management, and network-security features.
• Rack-mountable 1U form factor.
• Internal universal power supply.

24 Gigabit Ethernet Ports for Business Connectivity

The Cisco Catalyst C1300X-24P-4X provides 24 Gigabit Ethernet access ports for connecting computers, printers, wireless access points, compatible IP telephones, security cameras, and other Ethernet-enabled equipment. The 10/100/1000BASE-T interfaces support standard copper Ethernet connectivity, making the switch suitable for many existing business cabling installations.

Gigabit access connectivity gives connected devices a link speed of up to 1 Gbps per port, subject to the capabilities of the connected device, cabling, and network configuration. The switch can bring multiple users and devices together on a managed network while allowing administrators to organize traffic according to operational requirements.

Organizations that need more copper ports can compare the Cisco Catalyst C1300X-48T-4X and Cisco Catalyst C1300-48T-4X. For a related 24-port model without PoE, consider the C1300X-24T-4X.

Designed for Mixed Business Endpoints

A single access switch may serve multiple types of equipment. Workstations require reliable data connectivity, access points carry wireless client traffic, and compatible IP phones or cameras may require PoE power. The C1300X-24P-4X brings these access requirements together in one managed platform.

Actual performance depends on the traffic pattern, endpoint capabilities, uplink design, and configured network services. Administrators should assess the number of connected devices, expected bandwidth, and future growth before selecting a switch.

Power over Ethernet and the 385W Power Budget

One of the main advantages of the Cisco Catalyst C1300X-24P-4X is its integrated Power over Ethernet capability. Cisco specifies a total PoE power budget of 385 watts for this model. PoE allows compatible powered devices to receive power and data through the same Ethernet cable, helping reduce separate power cabling and simplify installations.

Potential PoE endpoints include compatible wireless access points, IP phones, cameras, and other devices designed to receive power over Ethernet. The actual number of devices that can be powered depends on their individual power requirements and the total available budget.

Planning PoE Capacity

Before deployment, calculate the combined power demand of the connected devices and leave suitable capacity for future additions. A device’s maximum power requirement may differ from its typical consumption, and power needs can vary between models and operating conditions.

Cisco’s Catalyst 1300X documentation lists PoE+ and IEEE 802.3bt Type 3 PoE++ support for the C1300X-24P-4X family entry. Because per-port power delivery depends on the supported operating mode, endpoint requirements, and configuration, confirm the exact compatibility requirements before connecting higher-power equipment.

For other PoE configurations, compare the Cisco C1300-24P-4X, the Cisco C1300-24FP-4X, and the Cisco C1300-48P-4X. These are related models, but their power budgets and hardware specifications differ.

Four 10G SFP28 Uplink Interfaces

The C1300X-24P-4X includes four SFP28 interfaces intended for high-speed uplink connectivity. These interfaces support 10 Gigabit Ethernet uplinks, allowing the access switch to connect to compatible aggregation switches or other network infrastructure with higher-capacity links than standard Gigabit Ethernet.

Faster uplinks can help reduce congestion when traffic from multiple access ports travels toward servers, other switches, or network services. The benefits depend on the complete network design, including the speed and capacity of the connected equipment.

Transceiver and Cable Compatibility

SFP28 interfaces require compatible optical transceivers, direct-attach cables, or other supported connection components appropriate to the intended link. Fiber type, distance, connector type, optical specifications, and support for the selected module should be checked before purchasing accessories.

Although the interfaces are SFP28, Cisco specifies 25G operation for stacking only on this model. Do not assume that a 25G interface mode is supported as a standard 25G uplink. Review Cisco’s compatibility documentation and the intended software configuration before deployment.

For alternative uplink configurations, you can also review the Cisco Catalyst C1300-24XS, Cisco Catalyst C1300-24XT, and Cisco Catalyst C1300-24XTS.

Switching Capacity and Forwarding Performance

The Cisco Catalyst C1300X-24P-4X has a specified switching capacity of 128 Gbps and a forwarding rate of 95.23 Mpps when measured using 64-byte packets. These figures describe the switch’s forwarding capability and help buyers compare models for different network requirements.

Switching capacity represents the aggregate bandwidth available within the switching architecture. Forwarding rate describes how many packets the device can process per second under the specified test conditions. Both figures are useful when assessing a switch, but real-world performance also depends on packet sizes, traffic patterns, configuration, and connected equipment.

Supporting Simultaneous Network Traffic

Business networks commonly carry several traffic types at the same time, including office applications, file transfers, voice communications, video streams, and wireless client traffic. A managed switch with appropriate access capacity and uplinks can help transport this traffic efficiently when the network is designed and configured correctly.

For a broader understanding of Cisco switching options, visit our guide to Cisco switches and their network roles or explore additional enterprise-oriented models such as the Cisco Catalyst C9200L-24P-4X-E and Cisco Catalyst C9200L-48P-4X-E.

Layer 2 Switching and Layer 3 Capabilities

The Catalyst 1300X platform supports managed switching and Layer 3 capabilities intended for business network environments. Layer 2 features help control traffic within local Ethernet networks, while supported Layer 3 functions can assist with routing between configured network segments.

VLANs and Network Segmentation

Virtual LANs allow administrators to divide a physical network into logical segments. For example, an organization may separate employee computers, voice devices, guest access, and management traffic into different VLANs. Segmentation can help organize network access and support security policies when combined with appropriate configuration.

Traffic Control and Resilience

Managed switching features such as spanning tree, link aggregation, and quality-of-service controls can support network stability and traffic management. The exact feature set and limits depend on the software version and supported configuration. Administrators should consult the official product documentation before implementing a production network.

For other managed access-switch options, see the Cisco C1300-24P-4G, Cisco C1300-24T-4X, and Cisco C1300-48FP-4X.

Security and Network Administration

Business switching requires more than simply connecting endpoints. Administrators may need to manage device access, isolate traffic, monitor network behavior, and maintain consistent configurations. The Cisco Catalyst 1300X family offers management and security capabilities intended to support these tasks in small and medium-sized business environments.

Depending on the supported configuration, available capabilities include VLAN-based segmentation, access-control features, authentication-related mechanisms, traffic policies, and network discovery protocols. Features should be enabled and configured according to the organization’s security requirements rather than assumed to be active automatically.

Deployment Best Practices

• Separate business, guest, voice, and management traffic where appropriate.
• Use supported authentication and access-control features for connected devices.
• Keep firmware and configuration practices aligned with Cisco guidance.
• Confirm that uplink components and connected endpoints are compatible.
• Document VLAN assignments, IP addressing, and port roles.
• Review PoE capacity before adding additional powered devices.

These practices help create a manageable network, but security outcomes depend on the complete infrastructure, correct configuration, and ongoing administration.

Installation, Power Supply, and Physical Design

The Cisco Catalyst C1300X-24P-4X is designed for rack-mounted installations. Its 1U form factor helps fit the switch into a standard network rack or wiring cabinet. The published unit dimensions are approximately 444.3 mm wide, 270 mm deep, and 43.94 mm high.

The switch uses an internal universal power supply with a specified input range of 100–240V AC at 50–60 Hz. Before installation, check the available rack space, power distribution, ventilation, cabling route, and environmental conditions at the intended location.

Physical Specifications

The figures above describe the device, not the packed shipping carton. Packaging dimensions and gross shipping weight can vary depending on the supplied accessories, packaging revision, and seller. Confirm the actual packed measurements when calculating international shipping charges.

Comparing the C1300X-24P-4X with Related Cisco Switches

Choosing the right switch depends on port count, PoE requirements, uplink speed, network architecture, and expected growth. The C1300X-24P-4X is a suitable candidate when a business needs 24 Gigabit Ethernet ports, integrated PoE, and 10G uplinks. Other models may be more appropriate when the organization needs additional ports, a different PoE budget, or a different access-interface type.

Related Products at NexoGet

• Cisco Catalyst C1300X-24T-4X – a related 24-port C1300X model without PoE.
• Cisco Catalyst C1300X-48T-4X – 48-port Gigabit access for larger wired deployments.
• Cisco Catalyst C1300-24P-4G – a related 24-port PoE switch with Gigabit SFP uplinks.
• Cisco Catalyst C1300-24P-4X – a related 24-port PoE model with 10G SFP+ uplinks.
• Cisco Catalyst C1300-24FP-4X – another 24-port PoE model in the Catalyst 1300 family.
• Cisco Catalyst C1300-48P-4X – 48-port PoE access for higher port-density requirements.
• Cisco Catalyst C1300-48FP-4X – an alternative 48-port PoE configuration.
• Cisco Catalyst C1300-8MGP-2X – a compact multigigabit option for selected deployments.
• Cisco Catalyst C1300-24MGP-4X – a multigigabit alternative for compatible endpoints.
• Cisco Catalyst C1300-48MGP-4X – a higher-density multigigabit option.
• Cisco Catalyst C1300-12XT – consider for a different copper Ethernet port-speed requirement.
• Cisco Catalyst C1300-12XS – an alternative for fiber-focused network designs.
• Cisco Catalyst C1300-16XTS – a different high-speed access configuration.
• Cisco Catalyst C1300-24XS – an option for networks requiring numerous SFP+ interfaces.
• Cisco Catalyst C1300-24XT – another option for high-speed copper connectivity.
• Cisco Catalyst C1300-24XTS – an alternative high-speed switch configuration.
• Cisco Catalyst C9200L-24P-4X-E – compare for enterprise access-network requirements.
• Cisco Catalyst C9200L-48P-4X-E – an alternative 48-port enterprise access switch.
• Cisco Catalyst C9300L-48T-4X-A – compare when evaluating a different enterprise switching platform.
• Cisco Catalyst C9300-24S-E – another option to evaluate for fiber-oriented access needs.
• Cisco Catalyst C9300X-12Y-E – a higher-performance platform to consider for different network designs.
• Cisco Catalyst C9500-48Y4C-E – compare for core or aggregation requirements.

These products belong to different configurations and, in some cases, different switching platforms. Compare the official datasheets carefully rather than assuming that PoE capabilities, uplink types, licensing, performance, or software features are interchangeable.

Typical Use Cases for Cisco C1300X-24P-4X

Business Offices

In offices, the switch can connect computers, printers, wireless access points, and compatible IP phones. PoE support can simplify endpoint installation where devices are located away from convenient electrical outlets.

Retail and Commercial Locations

Retail environments may use the switch to connect point-of-sale systems, wireless access points, cameras, and back-office devices. VLANs and managed traffic controls can help organize different device groups when configured to match operational requirements.

Education and Shared Workspaces

Schools, training facilities, and shared workspaces often combine wired computers, wireless access points, and communications equipment. A 24-port managed switch provides a central access point for these devices, while the uplink interfaces connect the access layer to the rest of the network.

Small and Medium-Sized Business Networks

Organizations that need a manageable combination of Gigabit Ethernet access, PoE, and 10G uplinks can consider this model as part of a structured network design. Actual suitability depends on the endpoint count, power demand, traffic requirements, and network topology.

Ordering, Warranty, and Customer Support

Before purchasing the Cisco Catalyst C1300X-24P-4X, confirm the exact model number, product condition, stock status, included accessories, warranty coverage, and delivery destination. International buyers should also confirm regional power requirements and whether the selected transceivers and cables are suitable for their network.

For ordering assistance, visit the NexoGet contact page. You can also review our customer services, warranty information, returns and refunds policy, and order tracking page before placing an order.

For general company information, see About NexoGet. Customers who need help with a concern can also visit our complaint submission page. Please check the relevant terms and policies for the latest conditions applicable to your order.

Why Consider the Cisco Catalyst C1300X-24P-4X?

The Cisco Catalyst C1300X-24P-4X combines 24 Gigabit Ethernet ports, a 385W PoE power budget, four 10G SFP28 uplink interfaces, and managed switching capabilities in a rack-mountable design. Its 128 Gbps switching capacity and 95.23 Mpps forwarding rate provide useful reference points when assessing the model for a business access network.

It is particularly worth evaluating when a deployment needs PoE-powered endpoints, managed network segmentation, and high-speed uplinks without moving immediately to a larger 48-port access switch. A successful installation still requires careful planning of PoE consumption, uplink compatibility, security configuration, and future capacity.

Explore the NexoGet product catalog or contact our team through the contact page to ask about pricing, availability, product condition, and international shipping for the Cisco Catalyst C1300X-24P-4X.

Frequently Asked Questions

How many Ethernet ports does the Cisco C1300X-24P-4X have?

It has 24 Gigabit Ethernet access ports and four SFP28 uplink interfaces.

Does the Cisco C1300X-24P-4X support PoE?

Yes. Cisco specifies a total PoE budget of 385W for this model. The supported power mode and available power per port should be checked against the connected device requirements and Cisco documentation.

What uplink speeds does this switch support?

The four SFP28 interfaces support 10G uplinks. Cisco specifies 25G operation for stacking only, so it should not be assumed to be a standard 25G uplink capability.

What is the switching capacity of the C1300X-24P-4X?

The specified switching capacity is 128 Gbps, with a forwarding rate of 95.23 Mpps for 64-byte packets.

Can the switch be installed in a network rack?

Yes. The C1300X-24P-4X is rack-mountable and has a height of approximately 43.94 mm, corresponding to a 1U form factor.

Where can I confirm availability and shipping details?

Contact NexoGet to confirm stock, product condition, included accessories, warranty details, and shipping arrangements for your destination.