Cisco C9200L-48P-4G-E Switch
48 Gigabit PoE+ Ports: High-density power delivery for the edge.
740W PoE Budget: Enough capacity for a full office of devices.
Fixed 4x 1G SFP Uplinks: Integrated fiber connectivity.
StackWise-80 Ready: Scalable and simplified management.
Hardware-Anchored Security: Secure boot and MACsec-128 encryption.
Chat directly with our B2B sales team via WhatsApp
Cisco C9200L-48P-4G-E Switch
The Cisco C9200L-48P-4G-E Switch provides 48 ports of Gigabit Ethernet with Full PoE+ support, allowing you to power a large number of devices like IP phones, wireless access points, and security cameras. With its Network Essentials (“E”) license, it provides foundational Layer 3 routing and is a perfect modern replacement for the legacy 48-port Catalyst 2960-X series.
Key Features and Capabilities
This switch balances high port density with simplified management and robust hardware-anchored security.
48 PoE+ Gigabit Ports : All 48 ports support the IEEE 802.3at PoE+ standard, providing up to 30W per port.
740W Total PoE Budget : Delivers significant power capacity to support a high density of powered devices across a large office floor.
Fixed 4x 1G SFP Uplinks : Includes four integrated 1G SFP fiber ports for backbone connectivity. Note that as an “L” model, these uplinks are fixed and cannot be upgraded to 10G.
StackWise-80 Technology : Supports stacking up to 8 switches with a total stacking bandwidth of 80 Gbps, allowing you to manage multiple units as a single logical entity.
Enhanced Security : Features hardware-level security, including AES-128 MACsec encryption, Trust Anchor technologies, and Secure Boot to protect your data and hardware.
Resilient Design : While the uplinks and fans are fixed, it supports optional redundant power supplies to ensure uptime in case of a power failure.
Ideal Use Cases
The C9200L-48P-4G-E is optimized for high-density, cost-conscious deployments:
Mid-Sized Office Spaces : Ideal for powering a large fleet of VoIP phones and desktop computers in a single rack.
Education and Retail : Perfect for schools or large retail stores that need to connect numerous access points and IP cameras across a large area.
Modernizing 48-port 2960-X Gear : The best-value upgrade path for organizations moving away from aging 2960-X or 2960-L infrastructure.
Edge Connectivity : Suited for the access layer where 1G uplinks are sufficient for the current bandwidth requirements.
Technical Specifications
| Feature | Specification |
| Downlink Ports | 48 x 10/100/1000 PoE+ |
| Uplink Ports | 4 x 1G SFP (Fixed) |
| PoE Power Budget | 740W |
| Switching Capacity | 104 Gbps |
| Stacking Bandwidth | 80 Gbps (StackWise-80) |
| Forwarding Rate | 77.38 Mpps |
| Software License | Network Essentials |
| Brand |
Cisco |
|---|---|
| Version |
original |
| Width |
44.5 cm |
| Required mains voltage |
Alternating current 100-240 V (50 – 60 Hz) |
| Flash memory |
4 GB |
| Housing type |
Rack mountable |
| Device type |
Switch – 48 ports – L3 – stackable |
| Weight |
4.35 kg |
| Size of the MAC address table |
16,000 entries |
| Manufacturer |
Cisco Meraki |
| Height |
28.8 cm |
| Jumbo frame support |
9198 bytes |
| Capacity |
Virtual networks: 1 ,IPv4 routes: 11000 ,IPv4 entries in routing table: 3000 ,IPv6 entries in routing table: 1500 ,Multicast scale: 1000 ,ACL tier entries: 1500 ,FNF entries: 16000 ,VLAN support: 1024 ,Switched virtual interfaces |
| Perfomance |
Multi-bandwidth: 80 Gbit/s ,Switching capacity: 104 Gbps ,Forwarding rate: 154.76 Mpps |
| Features |
Quality of Service (QoS), Cisco StackWise Technology, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Remote Switch Port Analyzer (RSPAN), NetFlow, Energy Efficient Ethernet, Management Information Base (MIB), Clas |
| Maximum storage temperature |
70 °C |
| Maximum supported number |
2 |
| Minimum storage temperature |
-40 °C |
| Ports |
48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP (uplink) |
| Port Count |
48 port |
| PoE budget |
1440 W |
| PoE |
PoE+ |
| PoE Capability |
PoE ,PoE+ |
| Product certifications |
CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN 61000-6-1, AS/NZS 60950-1, CCC, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CNS 13438, EN 55022 Class A, FCC CFR47 Par |
| RAM |
2 GB |
| Management Type |
Fully Managed (Layer 2) |
| Redundant power supply |
Optional |
| Remote Administration Log |
SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF |
| Routing Protocol |
OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, PIM-SSM, Policy-Based Routing (PBR), RIPng, MSTP |
| Interfaces |
48 x 1000Base-T RJ-45 PoE+ – 30 W ,4 x 1000Base-X SFP Uplink ,1 x Network Stack Device ,1 x Management (LAN) RJ-45 ,1 x Console RJ-45 |
| Power supply unit |
Internal power supply – hot-plug |
| Depth |
4.4 cm |
| Subtype |
Gigabit Ethernet |
| Important product information |
The DNA license is not included and must be ordered separately. Please contact your sales representative. |
| Permissible humidity during storage |
5 – 90% (non-condensing) |
| Permissible humidity level in the workplace |
5 – 90% (non-condensing) |
| mtbf |
347,760 hours |
Customer Reviews :
Reviews
Clear filtersThere are no reviews yet.
Reviews
Clear filtersThere are no reviews yet.