Cisco C9200L-48P-4G-E Switch

48 Gigabit PoE+ Ports: High-density power delivery for the edge.
740W PoE Budget: Enough capacity for a full office of devices.
Fixed 4x 1G SFP Uplinks: Integrated fiber connectivity.
StackWise-80 Ready: Scalable and simplified management.
Hardware-Anchored Security: Secure boot and MACsec-128 encryption.

1.421,00

Shipping

Authorities in our business will tell in no uncertain terms that Lorem Ipsum is that huge, huge no no to forswear forever. Not so fast, I'd say, there are some redeeming factors in favor of greeking text, as its use is merely the symptom of a worse problem to take into consideration.

Buying Guide

Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order.

Cisco C9200L-48P-4G-E Switch

The Cisco C9200L-48P-4G-E Switch provides 48 ports of Gigabit Ethernet with Full PoE+ support, allowing you to power a large number of devices like IP phones, wireless access points, and security cameras. With its Network Essentials (“E”) license, it provides foundational Layer 3 routing and is a perfect modern replacement for the legacy 48-port Catalyst 2960-X series.

Key Features and Capabilities

This switch balances high port density with simplified management and robust hardware-anchored security.

48 PoE+ Gigabit Ports : All 48 ports support the IEEE 802.3at PoE+ standard, providing up to 30W per port.
740W Total PoE Budget : Delivers significant power capacity to support a high density of powered devices across a large office floor.
Fixed 4x 1G SFP Uplinks : Includes four integrated 1G SFP fiber ports for backbone connectivity. Note that as an “L” model, these uplinks are fixed and cannot be upgraded to 10G.
StackWise-80 Technology : Supports stacking up to 8 switches with a total stacking bandwidth of 80 Gbps, allowing you to manage multiple units as a single logical entity.
Enhanced Security : Features hardware-level security, including AES-128 MACsec encryption, Trust Anchor technologies, and Secure Boot to protect your data and hardware.
Resilient Design : While the uplinks and fans are fixed, it supports optional redundant power supplies to ensure uptime in case of a power failure.

Ideal Use Cases

The C9200L-48P-4G-E is optimized for high-density, cost-conscious deployments:

Mid-Sized Office Spaces : Ideal for powering a large fleet of VoIP phones and desktop computers in a single rack.
Education and Retail : Perfect for schools or large retail stores that need to connect numerous access points and IP cameras across a large area.
Modernizing 48-port 2960-X Gear : The best-value upgrade path for organizations moving away from aging 2960-X or 2960-L infrastructure.
Edge Connectivity : Suited for the access layer where 1G uplinks are sufficient for the current bandwidth requirements.

Technical Specifications

Feature	Specification
Downlink Ports	48 x 10/100/1000 PoE+
Uplink Ports	4 x 1G SFP (Fixed)
PoE Power Budget	740W
Switching Capacity	104 Gbps
Stacking Bandwidth	80 Gbps (StackWise-80)
Forwarding Rate	77.38 Mpps
Software License	Network Essentials

Brand	Cisco
Version	original
Width	44.5 cm
Required mains voltage	Alternating current 100-240 V (50 – 60 Hz)
Flash memory	4 GB
Housing type	Rack mountable
Device type	Switch – 48 ports – L3 – stackable
Weight	4.35 kg
Size of the MAC address table	16,000 entries
Manufacturer	Cisco Meraki
Height	28.8 cm
Jumbo frame support	9198 bytes
Capacity	Virtual networks: 1 , IPv4 routes: 11000 , IPv4 entries in routing table: 3000 , IPv6 entries in routing table: 1500 , Multicast scale: 1000 , ACL tier entries: 1500 , FNF entries: 16000 , VLAN support: 1024 , Switched virtual interfaces
Perfomance	Multi-bandwidth: 80 Gbit/s , Switching capacity: 104 Gbps , Forwarding rate: 154.76 Mpps
Features	Quality of Service (QoS), Cisco StackWise Technology, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Remote Switch Port Analyzer (RSPAN), NetFlow, Energy Efficient Ethernet, Management Information Base (MIB), Clas
Maximum storage temperature	70 °C
Maximum supported number	2
Minimum storage temperature	-40 °C
Ports	48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP (uplink)
Port Count	48 port
PoE budget	1440 W
PoE	PoE+
PoE Capability	PoE , PoE+
Product certifications	CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN 61000-6-1, AS/NZS 60950-1, CCC, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CNS 13438, EN 55022 Class A, FCC CFR47 Par
RAM	2 GB
Management Type	Fully Managed (Layer 2)
Redundant power supply	Optional
Remote Administration Log	SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF
Routing Protocol	OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, PIM-SSM, Policy-Based Routing (PBR), RIPng, MSTP
Interfaces	48 x 1000Base-T RJ-45 PoE+ – 30 W , 4 x 1000Base-X SFP Uplink , 1 x Network Stack Device , 1 x Management (LAN) RJ-45 , 1 x Console RJ-45
Power supply unit	Internal power supply – hot-plug
Depth	4.4 cm
Subtype	Gigabit Ethernet
Important product information	The DNA license is not included and must be ordered separately. Please contact your sales representative.
Permissible humidity during storage	5 – 90% (non-condensing)
Permissible humidity level in the workplace	5 – 90% (non-condensing)
mtbf	347,760 hours