Cisco C1200-24T-4X Switch

Cisco C1200-24T-4X Overview

Watch Product Video Cisco C1200-24T-4X Switch  
Download PDF Datasheet|Cisco C1200-24T-4X Switch

Modern business networks often have many devices operating at Gigabit
Ethernet speeds while requiring substantially more bandwidth between
access switches and higher-level network infrastructure. The
Cisco C1200-24T-4X addresses this type of deployment
with 24 copper Gigabit Ethernet ports for connected devices and four
10 Gigabit SFP+ interfaces for uplink connectivity.

The switch is part of the Cisco Catalyst 1200 Series,
a family designed for managed business networking. Cisco documentation
lists the C1200-24T-4X with 24 x 10/100/1000 ports and four 10 Gigabit
SFP+ ports. The platform provides wire-speed, nonblocking switching,
with a listed switching capacity of 128 Gbps and forwarding rate of
95.23 million packets per second.

For organizations evaluating several Cisco access switches, you can
compare this model with the
Cisco C1200-24P-4X,
the
Cisco C1200-24FP-4X,
and the
Cisco C1200-48T-4X.
These models share the same Catalyst 1200 family but address different
port-density and PoE requirements.

Cisco C1200-24T-4X Key Specifications

24 Gigabit Ethernet Ports and 4 x 10G SFP+ Uplinks

One of the main reasons to consider the C1200-24T-4X is its port
architecture. The switch provides 24 Gigabit Ethernet access
ports for computers, servers, printers, access points and
other Ethernet-enabled devices. At the same time, four
10 Gigabit SFP+ uplinks provide a significantly
higher-speed path toward upstream network equipment.

This combination can be useful in networks where access devices operate
at 1Gbps but aggregated traffic between switches needs additional
capacity. The 10G SFP+ interfaces can therefore be used as uplinks
toward aggregation or distribution infrastructure, depending on the
network design.

For alternative Cisco access configurations, NexoGet also lists the
C1200-48T-4X,
which increases the Gigabit port count to 48 while retaining four
10G uplinks, as well as the
C1200-48P-4X
for a PoE-oriented configuration.

Managed Networking Features

The Catalyst 1200 platform includes features for managed network
operation, segmentation, traffic control and network administration.
Cisco documentation describes support for VLANs, spanning-tree
technologies, access control lists, Quality of Service and Layer 3
networking capabilities.

Cisco lists IPv4 wire-speed routing, support for static routes and
multiple Layer 3 interfaces within the Catalyst 1200 feature set.
IPv6 capabilities are also included, making the platform suitable for
networks that need both IPv4 and IPv6 connectivity.

The platform also supports QoS functionality including multiple
hardware queues, DSCP and 802.1p/CoS-based classification, scheduling
and traffic rate control. These capabilities can help network
administrators prioritize different traffic classes in environments
where voice, video, business applications and ordinary data traffic
share the same infrastructure.

Security functionality includes access control capabilities, secure
management through HTTPS and network access features designed to help
administrators control connectivity to the switch.

VLAN, STP and Network Segmentation

VLAN support is an important part of managed Ethernet switching.
Organizations can logically separate groups of devices without
requiring a physically separate switch for every network segment.
Typical deployments may use separate VLANs for employees, guest
networks, voice services, servers or infrastructure management.

The Catalyst 1200 platform also supports Spanning Tree functionality,
including STP, RSTP and MSTP options documented by Cisco. Spanning Tree
helps prevent Layer 2 loops in networks with redundant connections.

If your network requires a different Cisco access-switch configuration,
consider the
Cisco
C9200L-24T-4X-E,
Cisco
C9200L-48T-4X-E, and
Cisco
C9200-24T-E options in the same product catalog.

Quality of Service and Traffic Management

Network traffic is not always equal. Voice calls, video conferencing,
business applications and ordinary data transfers can have different
performance requirements. The Catalyst 1200 platform provides QoS
capabilities for classification, prioritization, scheduling and
traffic control.

Cisco specifies eight hardware queues and support for Strict Priority
and Weighted Round-Robin scheduling. QoS classification can use
mechanisms including DSCP and 802.1p/CoS. This makes the platform
suitable for managed networks where administrators need more control
over how traffic is handled across access interfaces.

Security and Administration

Network administrators can use access control features to restrict
traffic according to defined policies. Cisco’s documentation for the
Catalyst 1200 family describes IPv4 and MAC-based ACL capabilities,
along with management access controls.

Secure browser-based administration is also supported through HTTPS.
Management access can be controlled using management access lists,
helping administrators limit which interfaces, addresses or services
are permitted to access the switch management plane.

For customers evaluating a larger Cisco switching architecture,
the
Cisco
C9300-24S-E,
Cisco
C9300X-12Y-E,
Cisco
C9300X-24Y-E, and
Cisco
C9500-48Y4C-E-2
are additional products worth reviewing for different network roles.

Rack-Mountable Design

The Cisco C1200-24T-4X uses a rack-mountable form factor with a height
of approximately 44 mm. Its listed dimensions are approximately
445 x 240 x 44 mm, while the unit weight is approximately 2.78 kg.
The internal universal power supply supports 100–240V at 50–60 Hz.

This form factor makes the switch appropriate for structured network
installations where equipment is installed inside standard rack
environments. Its physical design also makes it practical to place
alongside patch panels, fiber termination equipment and other network
infrastructure.

Cisco C1200-24T-4X vs Other Catalyst 1200 Switches

Choosing between Catalyst 1200 models primarily depends on the number
of access ports, whether PoE is required and the desired uplink speed.
The C1200-24T-4X provides 24 Gigabit access ports and four 10G SFP+
uplinks without PoE on its access ports.

The
C1200-24P-4X
adds PoE+ functionality, while the
C1200-24FP-4X
provides a higher PoE power budget. If 48 Gigabit access ports are
required, the
C1200-48T-4X
and
C1200-48P-4X
are alternatives within the same 10G-uplink family.

For networks that only require Gigabit uplinks, the
C1200-24T-E-2G
can also be considered. Other Catalyst 1200 options available in the
catalog include the
C1200-8T-E-2G
and

Cisco C1200-8P-E-2G.

Related Cisco Networking Products

If you are building a complete Cisco network infrastructure, you may
also want to review related access switches and higher-capacity
platforms available from NexoGet. The
Cisco C9200-24P-E
provides a different access-switch configuration, while the
Cisco C9200-48P-E
offers a higher port count with PoE.

For additional Catalyst 1200 configurations, see the
Cisco C1300-24T-4G.
Reviewing multiple models before deployment can help match port density,
uplink requirements, PoE needs and network architecture.

NexoGet also provides broader access to its
network equipment catalog,
while the
product comparison page
can be used to compare available products before making a purchasing
decision.

Typical Applications for the Cisco C1200-24T-4X

• Small and medium-sized business Ethernet networks
• Enterprise access-layer deployments
• Branch office network infrastructure
• Office floors requiring 24 Gigabit Ethernet connections
• Networks requiring 10G uplinks to aggregation infrastructure
• Server and workstation connectivity
• VLAN-based network segmentation
• Managed network environments requiring QoS and ACL capabilities
• IPv4 and IPv6 network deployments

The exact suitability of the switch depends on the network topology,
required PoE capacity, uplink design, transceiver requirements and
software configuration. Network administrators should verify current
Cisco documentation and compatibility requirements before deployment.

Why Choose a Cisco Catalyst Managed Switch?

Managed switching provides substantially more control than an
unmanaged Ethernet switch. Administrators can segment traffic with
VLANs, implement access policies with ACLs, configure spanning-tree
protection, apply QoS policies and monitor network behavior through
management interfaces.

The Cisco Catalyst 1200 family combines these management capabilities
with a range of port configurations. This allows organizations to
select a model based on their actual connectivity requirements rather
than using the same switch design for every location.

For a 24-port deployment where 10 Gigabit uplinks are important, the
C1200-24T-4X provides a specific combination of
24 Gigabit Ethernet access ports and four 10G SFP+ uplinks.

Cisco C1200-24T-4X Frequently Asked Questions

What is the Cisco C1200-24T-4X?

The Cisco C1200-24T-4X is a managed switch from the Cisco Catalyst
1200 Series. It provides 24 Gigabit Ethernet ports and four 10 Gigabit
SFP+ uplinks.

How many Ethernet ports does the C1200-24T-4X have?

The switch has 24 10/100/1000 Gigabit Ethernet access ports. In
addition, it has four 10 Gigabit SFP+ uplink interfaces.

Does the C1200-24T-4X support 10 Gigabit Ethernet?

Yes. The model includes four 10 Gigabit SFP+ uplink ports. These ports
are intended for high-speed network connections and uplinks.

Is the Cisco C1200-24T-4X a PoE switch?

No. The C1200-24T-4X is the non-PoE configuration. Cisco offers
C1200-24P-4X and C1200-24FP-4X models for deployments that require
PoE+ capabilities.

What is the switching capacity of the C1200-24T-4X?

Cisco lists a switching capacity of 128 Gbps and a forwarding rate of
95.23 Mpps for the C1200-24T-4X.

Is the C1200-24T-4X suitable for rack installation?

Yes. Cisco lists the C1200-24T-4X as rack-mountable, with a physical
height of approximately 44 mm.

What are alternatives to the C1200-24T-4X?

Depending on requirements, alternatives include the
C1200-24P-4X
for PoE+,
C1200-48T-4X
for 48 Gigabit access ports, and the
C1200-48P-4X
for 48-port PoE+ connectivity with 10G uplinks.

Order and Support Information

Before ordering the Cisco C1200-24T-4X, verify the required quantity,
SFP+ transceiver compatibility, cabling, rack requirements and intended
network topology. If you need assistance selecting a Cisco switch,
visit the
NexoGet customer
services
page or use the
contact page
for additional information.

You can also review the
warranty information
and available purchasing policies before completing your order.

Conclusion

The Cisco Catalyst C1200-24T-4X is a 24-port managed
Gigabit Ethernet switch designed for networks that need higher-speed
uplink connectivity. Its combination of 24 x 10/100/1000 Ethernet
ports and four 10G SFP+ uplinks makes it suitable for connecting
end-user devices while providing high-bandwidth paths toward upstream
network infrastructure.

With managed networking features such as VLAN support, Spanning Tree,
QoS, ACL capabilities and Layer 3 networking functions, the platform
provides administrators with tools for building and managing
structured business networks. The 128 Gbps switching capacity and
95.23 Mpps forwarding rate further define the performance profile of
this model.

If you are comparing Cisco switches for a new installation or network
upgrade, review the related Catalyst products above and match the model
to your required port density, PoE requirements, uplink speed and
deployment architecture.