Cisco C1200-16P-2G Switch

Cisco C1200-16P-2G Switch – 16-Port Gigabit PoE+ Managed Switch

Watch Product Video Cisco CP-7841-K9 IP Phone  
Download PDF Datasheet|Cisco CP-7841-K9 IP Phone

The Cisco C1200-16P-2G Switch is a rack-mountable managed Gigabit Ethernet switch designed for business networks that need reliable connectivity, Power over Ethernet, flexible network management, and dedicated Gigabit uplinks. Part of the Cisco Catalyst 1200 Series, the C1200-16P-2G combines 16 Gigabit Ethernet PoE+ ports with 2 Gigabit SFP uplink ports, providing a practical platform for connecting IP phones, wireless access points, surveillance devices, computers, printers, and other Ethernet-connected devices.

With a 120W PoE power budget, the Cisco C1200-16P-2G can deliver PoE+ power across its supported Gigabit Ethernet ports while maintaining a compact 16-port design. The switch supports IEEE 802.3af and IEEE 802.3at PoE standards, making it suitable for deployments where network connectivity and device power need to be delivered through the same Ethernet infrastructure.

For organizations comparing different Cisco access switches, the C1200-16P-2G provides a middle-ground configuration between smaller 8-port models and larger 24-port or 48-port switches. You can also compare it with the Cisco Catalyst C1200-8P-E-2G, Cisco C1200-8FP-2G, or the non-PoE C1200-8T-E-2G when planning a network based on port count and PoE requirements.

Key Features of Cisco C1200-16P-2G

• 16 x 10/100/1000 Gigabit Ethernet PoE+ ports
• 2 x Gigabit SFP uplink ports
• 120W total PoE power budget
• IEEE 802.3af and IEEE 802.3at PoE support
• Up to 30W maximum PoE power per Gigabit Ethernet port within the available switch budget
• Layer 2 switching features
• VLAN, Voice VLAN and Guest VLAN support
• Spanning Tree Protocol, RSTP, MSTP and PVST+ support
• IEEE 802.3ad LACP link aggregation
• IPv4 and IPv6 routing capabilities
• ACL and port security features
• Quality of Service (QoS) with hardware queues
• SNMP v1, v2c and v3 management
• Browser-based Web User Interface
• SSH and secure management capabilities
• Rack-mountable design
• 1 GB DDR4 memory and 512 MB flash
• Dual-core ARM processor at 1.4 GHz
• 1.5 MB packet buffer

Designed for Modern Business Ethernet Networks

The Cisco C1200-16P-2G is designed for organizations that need more than basic unmanaged switching. Its managed networking features allow administrators to organize users and devices into logical network segments, prioritize important traffic, apply access policies, and monitor network operation.

The 16 Gigabit Ethernet ports provide a straightforward way to connect desktop computers, IP phones, wireless access points, cameras, and other network endpoints. Because the ports support PoE+, compatible powered devices can receive both data connectivity and electrical power through the Ethernet cable, helping simplify deployments where separate power adapters or electrical outlets may not be convenient.

For a smaller deployment, the Cisco C1200-8T-E-2G provides an 8-port non-PoE configuration, while the C1200-8P-E-2G offers a smaller PoE+ configuration. For networks requiring additional PoE capacity and port density, the Cisco C1200-24P-4X and Cisco C1200-24FP-4X provide larger alternatives within the same Catalyst 1200 family.

16 Gigabit PoE+ Ports with 120W Power Budget

One of the most important characteristics of the Cisco C1200-16P-2G is its integrated Power over Ethernet capability. Cisco specifies a total PoE power budget of 120W for this model. The switch supports both IEEE 802.3af and IEEE 802.3at PoE standards, allowing compatible powered devices to receive power through the network connection.

This makes the switch particularly useful for environments with a combination of wired endpoints and PoE-powered equipment. Common deployment scenarios can include IP telephony, wireless networking, security cameras, and other compatible Ethernet-powered devices. Actual PoE availability for individual devices depends on the device power requirements and the switch’s total available PoE budget.

If your network requires more available PoE power, a higher-density model such as the Cisco C1200-48P-4G or Cisco C1200-48P-4X can be considered. For a non-PoE 48-port configuration, the Cisco C1200-48T-4G and Cisco C1200-48T-4X are other options in the NexoGet catalog.

Gigabit SFP Uplinks for Network Expansion

The C1200-16P-2G includes two Gigabit SFP uplink interfaces. These ports can be used for connecting the access switch to upstream network infrastructure, aggregation equipment, or other compatible network devices using supported Gigabit SFP connectivity.

Dedicated uplinks are important in business networks because they provide a practical method of connecting an access switch to another switching layer without consuming the front-panel access ports intended for endpoint devices. This can help network administrators create structured access and uplink connections as their infrastructure grows.

Organizations that need higher uplink bandwidth can explore Catalyst 1200 models equipped with 10 Gigabit SFP+ interfaces, such as the Cisco C1200-24T-4X. The C1200-48P-4X is another option when both higher port density and 10 Gigabit uplinks are required.

VLAN, QoS and Layer 2 Network Management

The Cisco C1200-16P-2G supports a broad set of Layer 2 networking features. Cisco specifies support for up to 255 active VLANs simultaneously, including port-based and 802.1Q tag-based VLANs, management VLANs, guest VLANs and Auto Surveillance VLANs.

VLAN functionality allows administrators to separate different types of network traffic logically. For example, an organization can create dedicated VLANs for office users, IP phones, wireless devices, surveillance equipment, and management traffic. This approach can simplify network organization and support more controlled traffic policies.

The switch also supports Voice VLAN functionality, which is useful for business environments using Cisco or compatible IP phones. For organizations deploying Cisco voice endpoints, the NexoGet catalog includes several related devices such as the Cisco CP-7841-K9 IP Phone, Cisco CP-7821-K9, and Cisco CP-7861-K9.

Quality of Service is another important feature for mixed business traffic. The Catalyst 1200 platform supports hardware queues, classification and scheduling mechanisms that can be used to prioritize traffic according to configured policies. This is particularly relevant when voice, video, business applications, and standard data traffic share the same switching infrastructure.

Security Features for Business Networks

Network security is an important consideration when selecting a managed access switch. The Cisco C1200-16P-2G provides multiple security-related capabilities, including port security, Access Control Lists (ACLs), RADIUS authentication, storm control, DoS prevention, SSH, SSL/HTTPS management, and IEEE 802.1X authentication support.

Port security can be used to control MAC addresses learned on switch ports, while ACLs can provide traffic filtering and access-control policies based on configured criteria. IEEE 802.1X can also be used as part of an authenticated network-access architecture when supported by the surrounding infrastructure.

Secure management options are particularly important for remotely administered business networks. The platform supports browser-based HTTPS management and SSH-based administration, providing administrators with secure methods for configuring and monitoring the switch.

IPv4 and IPv6 Support

The Cisco Catalyst 1200 platform supports both IPv4 and IPv6 networking. Cisco documents wire-speed IPv4 and IPv6 routing capabilities, Layer 3 interfaces, CIDR support, DHCP relay, and IPv6 functionality including Neighbor Discovery and stateless address autoconfiguration.

This makes the C1200-16P-2G suitable for organizations that need a switching platform capable of operating in modern dual-stack network environments. IPv6 ACL and IPv6 QoS capabilities are also documented for the Catalyst 1200 Series.

For larger enterprise access deployments, customers can compare this switch with models such as the Cisco C9200-24P-E, Cisco C9200-48P-E, and Cisco C9200-24T-E.

Management and Monitoring

The Cisco C1200-16P-2G provides multiple management options. The Catalyst 1200 platform includes a built-in Web User Interface for browser-based configuration, system dashboards, maintenance, and monitoring. Cisco also documents support for SNMP versions 1, 2c, and 3, including SNMPv3 User-Based Security Model support.

The platform also supports Cisco Business Dashboard integration and the Cisco Business mobile application, providing additional options for configuration and monitoring depending on the deployment environment. Cisco Network Plug and Play capabilities are also documented for simplified provisioning workflows.

For organizations building a larger Cisco switching environment, NexoGet also provides products from other Cisco families. Relevant examples include the Cisco C9300-24S-E, Cisco C9300X-12Y-E, and Cisco C9300X-24Y-E. For higher-capacity network architectures, the Cisco C9500-48Y4C-E can also be evaluated as part of a broader Cisco switching solution.

Cisco C1200-16P-2G Technical Specifications

Cisco C1200-16P-2G vs. Other Cisco Switch Options

Selecting the right Cisco switch depends on port density, PoE requirements, uplink bandwidth, and the scale of the network. The C1200-16P-2G is positioned around a 16-port PoE+ configuration with two Gigabit SFP uplinks, making it different from both compact 8-port switches and larger 24- or 48-port platforms.

For example, users who need additional 24-port PoE capacity can consider the Cisco C1200-24FP-4G. Customers requiring a 48-port PoE configuration can explore the C1200-48P-4G. For a higher-speed uplink architecture, the C1200-24P-4X provides 10 Gigabit SFP+ uplink connectivity.

For Cisco Catalyst 9200 deployments, NexoGet also lists the C9200L-24P-4G-E, C9200L-48P-4G-E, C9200L-24P-4X-E, and C9200L-48P-4X-E. These models can be considered when a deployment requires a different combination of port density and uplink architecture.

Typical Applications for Cisco C1200-16P-2G

The combination of 16 Gigabit PoE+ ports, 120W PoE capacity, managed switching features, and two Gigabit SFP uplinks makes the Cisco C1200-16P-2G applicable to a range of business networking scenarios.

• Small and medium-sized business networks
• IP phone and business voice deployments
• Wireless access point connectivity
• PoE-powered surveillance equipment
• Office access-layer switching
• Branch office networks
• Retail and commercial network environments
• Managed Ethernet infrastructure
• Networks requiring VLAN segmentation
• Deployments requiring Gigabit SFP uplinks

Why Choose the Cisco C1200-16P-2G?

The Cisco C1200-16P-2G Switch brings together Gigabit Ethernet connectivity, PoE+, SFP uplinks, Layer 2 switching, Layer 3 routing features, network security, QoS, and centralized management capabilities in a single business-oriented switch. Its 16-port configuration can be a practical fit for organizations that do not require the port density of a 24-port or 48-port switch but still need PoE and managed networking features.

The 120W PoE budget gives network administrators flexibility when connecting multiple compatible powered devices, while the two Gigabit SFP uplinks provide dedicated connectivity toward upstream network equipment. VLANs, ACLs, QoS, IPv4/IPv6 capabilities, SNMP, SSH, and browser-based management provide the tools required for structured network administration.

For buyers comparing Cisco switches internationally, the Catalyst 1200 family also provides several configurations with different port counts, PoE capacities, and uplink options. Reviewing the complete NexoGet switch catalog can help identify a model that matches the required network architecture and expansion plans.

Order Cisco C1200-16P-2G from NexoGet

If you are looking for a Cisco C1200-16P-2G Switch for a business, branch office, IP telephony, wireless, surveillance, or managed Ethernet deployment, NexoGet provides access to a growing selection of Cisco networking products. Before purchasing, verify the required PoE power budget, SFP compatibility, port density, and network design requirements for your installation.

For additional Cisco networking products, visit the NexoGet Cisco networking product catalog and explore available switches, routers, IP phones, and related networking equipment. You can also contact the NexoGet team for product availability, pricing, and purchasing information.

Looking for a reliable 16-port PoE+ Gigabit switch with SFP uplinks? The Cisco C1200-16P-2G provides a balanced combination of connectivity, PoE capability, network management, security, and scalability for modern business Ethernet environments.