Cisco C9300-24S-E Switch
24 Gigabit SFP Fiber Ports: Optimized for high-speed fiber-optic connectivity.
Modular & Field-Replaceable: Supports hot-swappable Uplinks, Power Supplies, and Fans.
StackWise-480: Industry-leading stacking bandwidth for high-density scalability.
Network Essentials L3 Feature Set: Provides foundational Layer 3 routing and SD-Access.
Hardware-Anchored Security: Features Trust Anchor, AES-128 MACsec, and Secure Boot.
654,00
Authorities in our business will tell in no uncertain terms that Lorem Ipsum is that huge, huge no no to forswear forever. Not so fast, I'd say, there are some redeeming factors in favor of greeking text, as its use is merely the symptom of a worse problem to take into consideration.
Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order.
Cisco C9300-24S-E Switch
The Cisco C9300-24S-E Switch is part of Cisco’s flagship stackable enterprise switching platform. Running the Network Essentials license, it provides foundational Layer 3 routing and is designed to serve as the “bridge” between the access layer and the core of your network.
Key Features and Capabilities
Built on the powerful UADP 2.0 (Unified Access Data Plane) ASIC and an x86 CPU architecture, this switch is designed for high-density fiber deployments.
24 Gigabit SFP Ports : Optimized for fiber-optic connectivity, allowing for noise-immune, high-bandwidth links over long distances.
Modular Uplinks : The switch features a modular slot that supports optional network modules for $10G$, $25G$, or $40G$ uplinks, giving you the flexibility to upgrade your backbone as needed.
StackWise-480 : Supports the industry’s highest-density stacking bandwidth. You can stack up to 8 switches into a single logical unit with a massive 480 Gbps of stacking throughput.
StackPower Technology : Allows you to pool power supplies across the stack, providing power redundancy without needing external RPS units.
Advanced Security : Supports hardware-anchored Secure Boot, MACsec-128 encryption, and Trust Anchor technologies to protect against modern cyber threats.
IoT & Cloud Ready : Designed for Cisco SD-Access and fully manageable via Cisco DNA Center or CLI.
Ideal Use Cases
The C9300-24S-E is a “specialist” switch typically found in these scenarios:
Fiber Aggregation : Connecting multiple downstream access switches in different buildings or floors via fiber-optic uplinks.
Campus Networks : Serving as a small Core or Distribution switch for mid-sized organizations.
High-Interference Environments : Used in industrial or hospital settings where electromagnetic interference (EMI) makes copper cabling unreliable.
Data Center Edge : Providing 1G fiber handoffs for servers or storage arrays.
Technical Specifications
| Feature | Specification |
| Downlink Ports | 24 x 1G SFP (Fiber) |
| Uplink Interfaces | Modular (10G, 25G, 40G options) |
| Switching Capacity | 208 Gbps (Standalone) |
| Stacking Bandwidth | 480 Gbps (StackWise-480) |
| Forwarding Rate | 154.76 Mpps |
| RAM / Flash | 8 GB / 16 GB |
| Default Power Supply | 715W AC (Dual Redundant Optional) |
| Brand |
Cisco |
|---|---|
| Version |
original |
| Width |
44.4 cm |
| Required mains voltage |
Alternating current 120/230 V (50 – 60 Hz) |
| Required operating system |
Cisco IOS Universal |
| Expansion slots |
1 (total)/ 1 (free) x expansion slot |
| Flash memory |
16 GB |
| Housing type |
Rack mountable 1U |
| Device type |
Switch – 24 ports – L3 – managed – stackable |
| Service provided |
715 watts |
| Weight |
7.64 kg |
| Size of the MAC address table |
32,000 entries |
| Manufacturer |
Cisco Meraki |
| Height |
4.3 cm |
| Number installed |
2 |
| Jumbo frame support |
9198 bytes |
| Capacity |
IPv4 entries in routing table: 32000 ,IPv6 entries in routing table: 16000 ,Flexible NetFlow entries: 64000 ,VLAN IDs: 4000 ,Switched virtual interfaces (SVIs): 2000 |
| Perfomance |
Switching capacity: 128 Gbps ,Multi-bandwidth: 480 Gbit/s ,Forwarding rate: 154.76 Mpps |
| Features |
Trunking, full duplex mode, Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), |
| Maximum operating temperature |
45 °C |
| Maximum storage temperature |
70 °C |
| Maximum supported number |
2 |
| Minimum storage temperature |
-40 °C |
| Minimum operating temperature |
-5 °C |
| PoE Capability |
NoN PoE |
| Ports |
24 x Gigabit SFP |
| Port Count |
24 port |
| Product certifications |
CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI |
| RAM |
8 GB |
| Management Type |
Layer 3 Managed |
| Redundant power supply |
Yes |
| Remote Administration Log |
SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF |
| Routing Protocol |
OSPF, IS-IS, RIP-1, RIP-2, IGMP, VRRP, PIM-SM, OSPFv3, PIM-SSM, Policy-Based Routing (PBR), RIPng |
| Interfaces |
24 x Gigabit LAN SFP ¦ 1 x USB 2.0 |
| Software included |
Cisco ONE StealthWatch License Term – 25 Flow Licenses, 25 x Cisco ONE ISE BASE Tracker Licenses (5 years), 25 x Cisco ONE ISE PLUS Tracker Licenses (5 years), Network Plug-n-Play License |
| Status indicator |
status |
| Power supply unit |
Internal power supply – hot-plug |
| Depth |
48.8 cm |
| Subtype |
Gigabit Ethernet |
| Encryption algorithm |
128-bit AES |
| Important product information |
The DNA license is not included and must be ordered separately. Please contact your sales representative. |
| Permissible humidity during storage |
5 – 90% (non-condensing) |
| Permissible humidity level in the workplace |
5 – 90% (non-condensing) |
| mtbf |
284,130 hours |
Customer Reviews :
Related Products :
Reviews
Clear filtersThere are no reviews yet.