Cisco C9200L-48PXG-2Y Switch

Cisco Catalyst C9200L-48PXG-2Y Switch – 48-Port Multigigabit PoE+ Managed Switch

Watch Product Video Cisco C9200L-48PXG-2Y Switch  
Download PDF Datasheet|Cisco C9200L-48PXG-2Y Switch

The Cisco Catalyst C9200L-48PXG-2Y Switch is an enterprise-class managed access switch designed for modern business networks that require high-density Ethernet connectivity, Power over Ethernet Plus (PoE+), multigigabit access, and high-speed network uplinks. As part of the Cisco Catalyst 9200L Series, this model is suitable for enterprise offices, campus access networks, branch locations, and organizations upgrading their wired infrastructure to support modern wireless access points, IP phones, surveillance systems, and other connected devices.

Featuring 48 access ports, including eight multigigabit-capable ports and 40 Gigabit Ethernet ports, the C9200L-48PXG-2Y helps organizations connect a wide range of endpoints through a centralized network platform. Its two fixed uplink interfaces support speeds of up to 25 Gigabit Ethernet, providing an efficient path toward higher-capacity aggregation and distribution layers. Full PoE+ support also allows compatible powered devices to receive both network connectivity and electrical power through a single Ethernet cable.

For businesses looking for a scalable, centrally managed switching solution, the Cisco Catalyst C9200L-48PXG-2Y combines enterprise networking capabilities with flexible access connectivity. It is particularly relevant to deployments where wireless traffic, business applications, voice communications, and connected devices are placing increasing demands on the access layer.

Key Features of Cisco C9200L-48PXG-2Y

• 48 Ethernet access ports: A high-density interface configuration for enterprise endpoints and network-connected equipment.
• 8 multigigabit ports: Support for compatible devices operating at 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, or 10 Gbps, subject to the connected device and cabling.
• 40 Gigabit Ethernet ports: Standard Gigabit access connectivity for computers, printers, IP phones, cameras, and other Ethernet devices.
• 2 fixed high-speed uplinks: Support for 1G, 10G, and 25G uplink speeds, depending on the interface configuration and supported optics.
• Full PoE+ capability: IEEE 802.3at-compatible power delivery for supported devices, with power availability dependent on the installed power configuration.
• StackWise-160: Supports stacking within the compatible Catalyst 9200L family, with up to 160 Gbps of stack bandwidth.
• Enterprise management: Supports managed switching capabilities for segmentation, traffic control, monitoring, and access-layer administration.
• Enterprise security: Supports applicable Cisco Catalyst security and access-control features, depending on software configuration and licensing.

Technical Specifications of Cisco Catalyst C9200L-48PXG-2Y

Important: Final hardware specifications, power availability, software entitlement, and included accessories should be confirmed against the exact Cisco part number offered. The base model name and the complete orderable SKU may not communicate identical licensing or package details.

High-Density Connectivity for Modern Enterprise Networks

48 Ports for Business-Critical Devices

The 48-port configuration of the Cisco Catalyst C9200L-48PXG-2Y provides a practical foundation for organizations that need to connect numerous endpoints without deploying multiple smaller switches. A single access switch can accommodate desktop computers, workstations, network printers, compatible wireless access points, IP surveillance cameras, and other business devices.

For IT teams, consolidating access connectivity can simplify rack planning, network administration, and structured cabling. The switch can serve as an access-layer component in a larger enterprise architecture, connecting users and devices to aggregation or distribution switches through its high-speed uplinks.

Organizations comparing other Catalyst access models can also review the Cisco C9200L-48P-4G-E, Cisco C9200L-48P-4X-E, and Cisco C9200L-48PL-4G. These alternatives help buyers compare standard Gigabit access, uplink configurations, and PoE requirements before selecting a model.

Multigigabit Ethernet for Higher-Speed Endpoints

One of the most important advantages of the C9200L-48PXG-2Y is its combination of 40 Gigabit Ethernet ports and eight multigigabit ports. Standard Gigabit connectivity remains suitable for many business endpoints, but newer wireless access points and other high-performance devices may benefit from Ethernet speeds above 1 Gbps.

The eight multigigabit interfaces can support compatible 2.5G, 5G, and 10G connections, as well as supported lower speeds. This flexibility can help organizations upgrade wireless infrastructure without replacing every access switch when new bandwidth requirements emerge.

Actual connection speed depends on the endpoint, negotiated Ethernet rate, cable category and quality, port configuration, and environmental conditions. A multigigabit interface does not automatically make every connected device operate at 10 Gbps.

High-Speed Uplinks and Network Scalability

Two Fixed 25G-Capable Uplink Interfaces

The two fixed uplinks distinguish the C9200L-48PXG-2Y from Catalyst 9200L models equipped with four fixed 10G-capable uplinks. Supporting compatible 1G, 10G, and 25G configurations, these interfaces provide flexibility when connecting the access layer to a distribution switch, aggregation layer, or other supported network infrastructure.

Higher-speed uplinks can help reduce the risk of access-layer congestion when numerous devices generate simultaneous traffic. For example, an office with high-performance wireless access points, cloud applications, video collaboration, and large file transfers may benefit from additional uplink capacity.

The two uplink ports do not guarantee a particular aggregate throughput or redundancy arrangement in every deployment. Available bandwidth depends on the configured link speeds, traffic patterns, and whether the links operate independently or participate in a supported aggregation or redundancy design.

StackWise-160 for Simplified Access-Layer Management

StackWise-160 allows compatible Catalyst 9200L switches to operate as a stack with up to 160 Gbps of stack bandwidth. Stacking can simplify management when a network requires additional access ports or when multiple switches need to be administered as a coordinated system.

For a growing office or campus environment, stacking can help standardize configuration and reduce the operational complexity associated with managing multiple independent access switches. The exact number of stack members, supported topology, software requirements, and hardware compatibility should be checked against Cisco’s documentation for the intended deployment.

PoE+ Power Delivery for Connected Devices

One Ethernet Cable for Data and Power

The Cisco C9200L-48PXG-2Y supports full PoE+ functionality for compatible powered devices. PoE+ can deliver both Ethernet connectivity and electrical power through a single network cable, reducing the need for separate local power adapters or electrical outlets at each endpoint.

This capability is useful for enterprise wireless access points, compatible VoIP phones, IP cameras, and other devices designed to receive power through Ethernet. It can simplify installations in offices, meeting rooms, hallways, reception areas, and other locations where direct access to electrical outlets may be inconvenient.

Understanding the PoE Power Budget

The model supports a maximum PoE budget of up to 1,440 W under the applicable power configuration. The amount of power available to connected devices depends on the installed power supply arrangement and the switch’s operating requirements.

Before deployment, network administrators should calculate the expected consumption of all powered endpoints, including their maximum supported draw and any planned future expansion. This is especially important when a switch serves a large number of wireless access points, cameras, or other higher-power equipment.

PoE+ support does not mean that every connected device will continuously consume the maximum available wattage. Devices negotiate and draw power according to their requirements and the supported PoE standard. Compatibility should be verified for endpoints that require power beyond the capabilities of IEEE 802.3at.

Enterprise Management, Segmentation, and Security

Managed Switching for Structured Network Administration

As a managed enterprise switch, the C9200L-48PXG-2Y is intended for environments where administrators need control over traffic, access, monitoring, and network configuration. Cisco IOS XE provides the software foundation for supported management and enterprise switching capabilities.

Depending on the software release, configuration, and applicable license, network teams can use supported VLANs to separate departments or device groups, configure traffic prioritization, monitor interface activity, and apply network access policies.

For example, a business may use separate logical network segments for employees, voice devices, guest access, and surveillance systems. Appropriate segmentation can improve administrative clarity and help limit unnecessary traffic between device groups.

Access Control and Network Protection

Enterprise networks need more than physical connectivity. Administrators should consider authentication, device access policies, secure management practices, software maintenance, and monitoring when deploying a managed switch.

Applicable Cisco Catalyst security capabilities may support access control and network protection requirements, depending on the selected license, IOS XE release, and configuration. Features should not be assumed to be enabled by default or available under every licensing entitlement.

For the best results, organizations should align switch configuration with their security policies, maintain supported software versions, restrict administrative access, and validate interoperability with existing network security systems.

Recommended Applications for Cisco C9200L-48PXG-2Y

Enterprise Offices and Corporate Campuses

Large offices often need to connect computers, printers, conference room equipment, access points, and business communication systems. The 48-port design helps provide a consolidated access layer, while PoE+ reduces the need for separate power infrastructure for compatible endpoints.

Wi-Fi 6 and Wi-Fi 6E Access Networks

Wireless networks increasingly depend on capable wired infrastructure. The switch’s multigigabit ports are designed to accommodate compatible access points that need more than 1 Gbps of wired bandwidth. This can make the model relevant to wireless upgrades in offices, educational facilities, commercial buildings, and branch deployments.

Actual wireless performance depends on the access point, client devices, radio configuration, channel conditions, uplink design, and broader network capacity. Selecting a multigigabit switch is one part of planning a high-performance wireless environment.

IP Telephony and Video Collaboration

Businesses using network-based voice and collaboration systems can connect compatible IP phones and related equipment through Ethernet access ports. PoE+ can power supported phones without separate adapters, while network segmentation and traffic prioritization can help administrators design an environment suitable for real-time communications.

For compatible Cisco phone deployments, NexoGet also lists the Cisco CP-8851-K9 IP Phone, Cisco CP-8861-K9 IP Phone, Cisco CP-8865-K9 IP Phone, and Cisco CP-8875-K9 IP Phone. Confirm the phone’s power, network, and software requirements before connecting it to the proposed infrastructure.

IP Surveillance and Connected Building Systems

Compatible IP cameras and building devices can benefit from centralized Ethernet connectivity and PoE+. For deployments with many endpoints, administrators should consider the total PoE budget, network segmentation, recording traffic, retention infrastructure, and uplink capacity when designing the complete solution.

Cisco Catalyst C9200L-48PXG-2Y vs. Other Cisco Switches

The best switch depends on port density, PoE requirements, uplink capacity, access speeds, budget, and expected network growth. The following comparison highlights the practical differences between selected models available in the NexoGet product catalog.

Comparison note: Port configurations are based on the respective Catalyst model specifications. Verify the full product SKU, license, software entitlement, power supply, and supported optics before purchase. The table is intended to help shortlist models rather than replace the official technical datasheet.

Explore Related Cisco Networking Products at NexoGet

When designing a complete network, it is useful to compare access switches with other products in the same family. The following models provide additional options for different port densities, uplink requirements, and deployment scales.

Cisco Catalyst 9200 and 9200L Series

• Cisco C9200-24P-E – A 24-port Catalyst 9200 PoE+ platform with modular uplink options.
• Cisco C9200-48P-E – A 48-port Catalyst 9200 PoE+ model for enterprise access networks.
• Cisco C9200-48T-E – A data-only 48-port Catalyst 9200 option.
• Cisco C9200L-24P-4G-E – A 24-port PoE+ access switch with four Gigabit uplinks.
• Cisco C9200L-24T-4G – A 24-port data access model.
• Cisco C9200L-24T-4X-E – A data-only model with four 10G-capable uplinks.
• Cisco C9200L-48T-4X-E – A 48-port data model with four high-speed uplinks.
• Cisco C9200L-48PL-4X – A 48-port partial-PoE+ model with four 10G-capable uplinks.
• Cisco C9200L-48PL-4G – A 48-port partial-PoE+ option with Gigabit uplinks.

Cisco Catalyst 1300 Series

• Cisco C1300-48P-4G – A 48-port PoE+ switch for suitable business access networks.
• Cisco C1300-48P-4X – A 48-port PoE+ model with 10G-capable uplinks.
• Cisco C1300-48FP-4X – A 48-port full-PoE+ option with higher-speed uplinks.
• Cisco C1300-24MGP-4X – A multigigabit PoE+ option for compatible access points and endpoints.
• Cisco C1300-48MGP-4X – A higher-density multigigabit option to consider for selected business networks.
• Cisco C1300X-48P-4X – An alternative Catalyst 1300X PoE+ platform.
• Cisco C1300X-48NGU-4X – Another Catalyst 1300X model for comparison during network planning.

Higher-Capacity Catalyst Platforms

• Cisco C9300-24S-E – A Catalyst 9300 model for deployments requiring a different interface and platform configuration.
• Cisco C9300X-12Y-E – A higher-performance Catalyst 9300X option for suitable network designs.
• Cisco C9300X-24Y-E – Another Catalyst 9300X model to evaluate for higher-capacity infrastructure.
• Cisco C9500-48Y4C-E – A Catalyst 9500 platform to consider for appropriate aggregation or core-network requirements.

How to Choose the Right Cisco Access Switch

Selecting a switch involves more than counting Ethernet ports. Before purchasing the C9200L-48PXG-2Y, network planners should evaluate the number of connected devices, the required Ethernet speeds, PoE consumption, uplink design, software licensing, and future expansion plans.

Evaluate Port Speed Requirements

Determine which endpoints require standard Gigabit Ethernet and which can benefit from multigigabit connectivity. If most devices use 1G Ethernet but selected wireless access points require 2.5G, 5G, or 10G, the C9200L-48PXG-2Y provides a combination of standard and faster access ports.

Calculate Power Requirements

Prepare an inventory of PoE-powered devices and their expected power consumption. Confirm that the planned power supply configuration provides sufficient capacity for existing equipment and future expansion.

Plan Uplink Capacity

Consider the traffic expected from all access ports and the bandwidth available between the switch and the next network layer. The two 25G-capable uplinks provide options for high-speed connectivity, but the final design should account for redundancy, oversubscription, and compatibility with upstream equipment.

Confirm Licensing and Compatibility

Verify the complete Cisco SKU, software entitlement, required features, supported transceivers, stacking compatibility, and power accessories. These checks are particularly important for organizations integrating the switch into an established enterprise environment.

Installation and Deployment Considerations

Before installation, confirm that the rack has adequate space, airflow, electrical capacity, and appropriate environmental conditions. Prepare the required Ethernet cabling and compatible uplink components, and verify that the upstream switching infrastructure supports the selected link speeds.

After installation, administrators should update the switch to an appropriate supported software release, establish secure management access, configure VLANs and access policies, and verify connectivity across all required interfaces. PoE-powered endpoints should be checked to confirm that they receive the required power and establish stable network connections.

For multi-switch deployments, validate the proposed StackWise configuration and confirm that the selected models and software releases are compatible. A documented implementation plan can help reduce configuration errors and simplify future troubleshooting.

Why Consider Cisco Catalyst C9200L-48PXG-2Y from NexoGet?

NexoGet provides a product catalog for organizations comparing networking hardware, enterprise switching solutions, and business communication equipment. Buyers evaluating the Cisco Catalyst C9200L-48PXG-2Y can explore related Cisco products to identify an appropriate combination of access switches, uplink capabilities, and connected endpoints.

To review available products, visit the NexoGet online shop or browse the NexoGet homepage. For product questions, configuration requirements, price confirmation, or availability inquiries, use the NexoGet contact page.

You can also learn more about the fundamentals of Ethernet switching in the Cisco switch guide. For general assistance with orders and customer support, consult NexoGet Customer Services and the warranty information.

Frequently Asked Questions

How many ports does the Cisco C9200L-48PXG-2Y have?

The switch has 48 access ports: 40 Gigabit Ethernet ports and eight multigigabit ports capable of supporting speeds up to 10 Gbps. It also provides two fixed uplink interfaces supporting compatible speeds up to 25 Gbps.

Does the Cisco C9200L-48PXG-2Y support PoE+?

Yes. The model supports full PoE+ for compatible devices. The available power for connected endpoints depends on the installed power configuration and the total power requirements of the switch.

Can this switch connect Wi-Fi 6 and Wi-Fi 6E access points?

It can connect compatible wireless access points through its Ethernet interfaces. The multigigabit ports can support access points that require more than 1 Gbps, provided the access point, cabling, and port configuration support the required speed.

What is the difference between C9200L-48PXG-2Y and C9200L-48PXG-4X?

The C9200L-48PXG-2Y has eight multigigabit ports and 40 Gigabit ports, with two uplinks supporting up to 25G. The C9200L-48PXG-4X has 12 multigigabit ports and 36 Gigabit ports, with four uplinks supporting up to 10G. The more suitable model depends on the number of multigigabit endpoints and the preferred uplink design.

Is the Cisco C9200L-48PXG-2Y suitable for enterprise networks?

Yes. Its high port density, multigigabit access, PoE+, stacking capabilities, and high-speed uplinks make it suitable for many enterprise access-layer deployments. Final suitability depends on the organization’s traffic requirements, licensing, security policies, and network architecture.

Does the switch include everything required for installation?

Included accessories can vary according to the exact orderable SKU and supplier package. Before purchasing, confirm the power supply, power cable, rack-mount accessories, uplink transceivers, software entitlement, and any other components required for the intended installation.

Conclusion: A Flexible Multigigabit Access Switch for Growing Networks

The Cisco Catalyst C9200L-48PXG-2Y Switch is designed for organizations that need a combination of high-density Gigabit Ethernet, multigigabit access, PoE+ power delivery, and high-speed uplink connectivity. Its 48 access ports, eight multigigabit interfaces, two 25G-capable uplinks, and StackWise-160 support make it a strong candidate for evaluating enterprise office, campus, and branch network requirements.

For businesses modernizing wired infrastructure to accommodate higher-performance wireless access points, connected devices, and growing application traffic, the C9200L-48PXG-2Y offers a flexible access-layer platform. Compare its port configuration, power requirements, uplink design, and licensing with the related Cisco switches available at NexoGet to select the solution that best matches your network.

For current pricing, product availability, and confirmation of the exact configuration, contact NexoGet before placing your order.